Autostart AS-2500 TW Owner's Manual download pdf (Page 200)

that they are about to shift the transmission into RE-

VERSE (R). Due to this feature, a slow shift to REVERSE

(R) can be perceived as a high shift effort.

To shift out of REVERSE bring the vehicle to a complete

stop and press the clutch. Shifting out of REVERSE prior

to a complete stop may cause high shift effort.

POWER TAKE OFF OPERATION — IF EQUIPPED

(CHASSIS CAB ONLY)

This vehicle when equipped with either the AS69RC auto-

matic six-speed or G-56 manual six-speed transmissions,

will allow for an aftermarket upfit with a transmission

driven PTO (power take off). The customer will have the

ability to operate the PTO in either a “stationary” or

“mobile” mode. The vehicles will be factory set to the

“stationary” mode. To select ’mobile mode’ You will need

to enter the commercial vehicle menu on the EVIC screen

and select mobile PTO mode. Details of the PTO selection

modes and further PTO information is available at the Ram

Truck Bodybuilders web site. www.rambodybuilder.com

AS69RC Six-Speed Automatic Transmission Only

The PTO drive gear (part of the AS69RC) operates at

torque converter turbine speed. The turbine speed will be

less than engine speed when the torque converter clutch

is not engaged and will be same as engine speed when

the torque converter clutch is engaged.

Stationary Mode

To operate the PTO in this mode the vehicle must meet

the following conditions:

• Be in PARK position (vehicles equipped with auto-

matic transmission)

• PTO switch has been activated

• Parking brake applied (vehicles equipped with

manual transmission)

198 STARTING AND OPERATING

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 329 330

No comments

Autostart AS-2500 TW Owner's Manual Page 200