Autostart AS-2500 TW Owner's Manual download pdf (Page 161)

NOTE: If the ignition switch is left in the ACC or RUN

(engine not running) position and the transmission is in

PARK, the system will automatically time out after 30

minutes of inactivity and the ignition will switch to the

OFF position.

ENGINE START/STOP Button Functions – With

Driver’s Foot OFF The Brake Pedal (In PARK Or

NEUTRAL Position)

The ENGINE START/STOP button operates similar to an

ignition switch. It has four positions, OFF, ACC, RUN

and START. To change the ignition switch positions

without starting the vehicle and use the accessories

follow these steps.

1. Starting with the ignition switch in the OFF position:

2. Press the ENGINE START/STOP button once to

change the ignition switch to the ACC position (EVIC

displays “ACC”),

3. Press the ENGINE START/STOP button a second time

to change the ignition switch to the RUN position

(EVIC displays “RUN”),

4. Press the ENGINE START/STOP button a third time

to return the ignition switch to the OFF position (EVIC

displays “OFF”).

Keyless Enter-N-Go™ Starting Procedure – Engine

Manifold Air Temperature 0° F To 66° F (–18° C to

19° C)

NOTE: The temperature displayed in the Electronic

Vehicle Information Center (EVIC) does not necessarily

reflect the engine manifold air temperature. Refer to

“Electronic Vehicle Information Center (EVIC)” in “Un-

derstanding Your Instrument Panel” for further informa-

tion. When engine temperatures fall below 66°F (19°C)

the “Wait To Start Light” will remain on indicating the

intake manifold heater system is active.

STARTING AND OPERATING 159

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 329 330

No comments

Autostart AS-2500 TW Owner's Manual Page 161