Autostart AS-2272 Installation Guide download pdf (Page 1)

Quick Reference Install Guide

VSM50BT/DSM50BT

BLUETOOTH Module

Introduction

This product can be used as a standalone product or in conjunction with an exist-

ing Directed product. It is compatible with most Directed Security, Remote Start and

hybrid systems. This guide also assumes that the user has already downloaded the

bluetooth app to their smartphone, its required for installation testing.

First determine whether the system is being installed as a standalone or being con-

nected to an existing product. If being used with an existing product, determine

whether the 8210 RF adapter kit is also required. Start with the following installation

procedure then go to the appropriate standalone or existing product procedure and

follow the instructions provided.

Installation Procedure

First, determine an appropriate location for the DSM50BT module such as along the

dashboard. It is recommended that you mount the module in the highest unobstructed

position possible. This offers the best signal reception. The harness length and wiring

route through the dashboard may also dictate the position chosen.

Note: Do not extend harnesses beyond the manufactured length.

The DSM50BT module comes with a mounting bracket and hardware. Mount this

bracket ﬁrst using the provided hardware and insert the module into it.

Note: Caution should be taken when mounting the bracket due to possible interfer-

ence with existing harnesses or equipment around or behind the mounting position.

As a Standalone

1. Connect the unterminated end of the H1 main harness ﬁrst using the following

wiring table and diagram.

2. Connect the H1 connector end to the middle port (white)of the module.

H1 6-pin Harness

Pin # Wire Color Connection/Description

1 Red +12V

2 Black GND

3 Green Lock (output 1)

4 Blue Unlock (output 2)

5 White Start/Stop (output 4)

6 Pink Trunk (output 3)

Wiring Diagram for Standalone

CPU1

Green White Black

Directed

Control Module

Control Center

Bluetooth Control Module

Programming

LED

Learn

Button

Control

Button

Status

LED

Pair

Button

Note: Actual Control Module may dier

to the example shown in diagram.

Arrow to Control Module does not reect

the actual location of this connection

Note: Actual Control Center

may dier to the example

shown in diagram

H1 Main Harness

(see wiring table)

Bluetooth Control Module

Side view, Standalone application

H1 Main Harness

(see wiring table)

Not used

Programming, Pairing and Learning the System

The smartphone must be paired with the system for both Standalone and Existing

Product conﬁgurations.

For conﬁgurations involving an existing product the Bluetooth module must also be

paired to the control module of the existing product.

Note: Programming or Learning must be done within 60 seconds of power up.

Power up and if no activity is detected a after accessing these modes begins a 60

second timer, once this period has expired, access to these modes is no longer avail-

able while the system is still powered on. Cycle power to re-initiate access period.

To Pair the Smartphone to the DSM50BT module:

1. Press and hold the Pair button on the module for ten seconds, continue holding

until the red LED (approximately ﬁve seconds) changes to solid blue.

2. Release the Pair button. The blue LED begins ﬂashing to indicate Pairing mode.

Note: Perform the next steps within sixty seconds or the unit will exit pairing

mode.

3. Turn on the Bluetooth feature of your cellular device, enter the pairing menu

and select “SmartStartBT- ####” from the available devices list. Each Directed

DSM50BT device has a unique ID.

4. The Blue LED begins ﬂashing rapidly and then turns on solid to indicate success-

ful pairing and connection between the smartphone and Directed DSM50BT

device.

5. Press and release the Pair button to exit pairing mode manually. The LED turns

off to indicate exit. If this step is not performed, Pairing mode exits automati-

cally within sixty seconds.

Note: The system can only be paired or connected with one smartphone at a time.

Feature Programming Procedure:

1. Disconnect power from the unit and then reconnect and power the unit.

Note: Programming can only be done within sixty seconds of the unit being

powered up, if the time has elapsed before you have entered programming

you can power the unit down and up again to enter programming again.

2. Press and hold the Learn and Pair buttons simultaneously for ﬁve seconds (with-

in sixty seconds of power up), the Red LED comes on solid.

3. Release the buttons. The Red LED shuts off and starts ﬂashing once every two

seconds to conﬁrm entry into the feature list, menu item #1.

4. Press/release the Learn button to advance to the next feature in the menu (see

Feature Option Menu). The Red LED ﬂashes the corresponding number of times

as the menu item # you have selected.

Example: 3 red LED ﬂashes at a time = Menu item #3

Note: If the number of menu items is exceeded, the routine loops back to Menu

Item 1.

5. To access the available options for a selected feature in the menu, press/

release the Pair button; the Blue LED ﬂashes the corresponding number of times

as the option # you have selected (see Features Option Menu).

Example: 3 Blue LED ﬂashes at a time = Opt. 3

Note: If the number of options is exceeded, the routine loops back to Opt 1.

6. Once a desired option is reached, press/release the Learn button to save the

option, change and advance to the next feature on the menu, or continue to

press/release the Learn button until another desired feature is reached.

7. Press and hold the Learn and Pair buttons simultaneously for ﬁve seconds to exit

programming manually or wait sixty seconds for the module to automatically

exit feature programming. The LED ﬂashes Blue/Red for one second to conﬁrm

feature programming has been exited.

Feature Option Menu

Default settings are in bold type.

Item

Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+

Lock output

.8s

.4s 3.5s .4s x2

Unlock output

.8s

.4s 3.5s .4s x2

Comfort Close

Off

CC1 CC2

Output 1 type

Lock

Unlock Trunk Start 5. Aux 1

6. Aux 2

Output 2 type

Lock

Unlock

Trunk Start

Output 3 type

Lock

Unlock

Trunk

Start

Output 4 type

Lock

Unlock Trunk

Start

RF Learning 1

Off

(ﬂex out)

Keeloq Supercode Astro

RF Learning 2

Autostart *

HDR-AM-

TYPE1

HDR-AM-

TYPE2

HDR-AM-

TYPE3

HDR-FM-

TYPE1

5. HDR-

FM-TYPE2

6. LDR-FM

Factory Reset

* For Autostart models, look up the RF mode Option number using the Autostart RF

type Table on page 2.

Feature Option descriptions

1. Lock output: Selects pulse duration

0.8 sec.: the lock output pulses = 800 ms

0.4 sec.: the lock output pulses = 400 ms

3.5 sec.: the lock output pulses = 3.5 sec

4s X2: the lock output pulses twice with each pulse 400 ms in duration

2. Unlock output: Selects pulse duration

0.8 sec.: the unlock output pulses = 800 ms

0.4 sec.: the unlock output pulses = 400 ms

3.5 sec.: the unlock output pulses = 3.5 sec

4s X2: the unlock output pulses twice with each pulse 400 ms in duration

3. Comfort Closure: Selects CC type for the Lock output wire

Off: Comfort Closure is defeated when locking

Comfort Closure 1: the door lock pulse (or 2nd pulse for double pulses) re-

mains on for 20 seconds.

Comfort Closure 2: 800 mS following the end of the door lock pulse (or 2nd

With an Existing Product

1. Unplug the existing control center (IVU) cable.

2. Connect the H2 harness from the green port of the DSM50BT module to the

control center (see note).

3. Now connect the disconnected end of the control center cable to the black

porton the module (see note).

4. Terminate only the required loose wires of the H1 main harness ﬁrst using the

following wiring table and diagram.

5. Connect the H1 connector end to the white port of the DSM50BT module .

Note: If the supplied cables do not ﬁt the Directed system, then the system requires

the 8210 RF adapter kit which is sold separately.

H1 6-pin Harness

Pin # Wire Color Connection/Description

1 Red +12V

2 Black GND

3 Green Not Connected

4 Blue Not Connected

5 White Not Connected

6 Pink Not Connected

Note: Cut unused wires back to harness sleeve to prevent possible shorts.

Wiring Diagram for use with Existing Product

CPU1

Green White Black

Directed

Control Module

Control Center

Bluetooth Control Module

Programming

LED

Learn

Button

Control

Button

Status

LED

Pair

Button

Note: Actual Control Module may dier

to the example shown in diagram.

Arrow to Control Module does not reect

the actual location of this connection

Note: Actual Control Center

may dier to the example

shown in diagram

H1 Main Harness

(see wiring table)

Bluetooth Control Module

Side view, Standalone application

H1 Main Harness

(see wiring table)

Not usedNot used

1 2

Summary of Contents

Page 1 - Quick Reference Install Guide

Page 2 - RF Learning Procedure:

Autostart AS-2272 Installation Guide Page 1

Browse online or download Installation Guide for Car alarm Autostart AS-2272. Autostart AS-2272 Install guide User Manual

Summary of Contents

More documents for Car alarm Autostart AS-2272

Comments to this Manuals

Autostart AS-2272 Installation Guide Page 1

Browse online or download Installation Guide for Car alarm Autostart AS-2272. Autostart AS-2272 Install guide User Manual

Summary of Contents

More documents for Car alarm Autostart AS-2272

Comments to this Manuals

Related products and manuals for Car alarm Autostart AS-2272